Which tool can Change km in EDC16 ECU in 2005 Audi A4 b7

“I’m looking for a cheap mileage adjustment tool ,it can changer the KM in EDC16 ECU in 2005 Audi A4 b7 by obd2,which tools can you recommed?”

Here is some several pieces of working odometer correction tool in EDC16 ECU in 2005 Audi A4 b7 for based real user’s experience,Thanks all experience from mhhauto.com forum member.

car modele and year:

EDC16 ECU in 2005 Audi A4 2.0TDI 140cv

Objective:

Change the mileage

Tools options:

NO1:Carprog Full v9.31/ v8.21 tested ok .

NO2:VAG DASH CAN 5.29

Note :i would recommend you to not open ecu or you will damage it .you need to have experience to do do that ,get vag dash can 5.29 and you will finish the job.

NO3: BDM100 ECU Programmer

Safe way to open and do the job with BDM ,Older version could fail with your ecu.Tt is hard to damage EDC 16 during opening when you are a little bit careful,you don’t have to lift PCB,only remove the cover .Not the hard way like MB EDC 16.

NO4:Cheap V4.94 Digiprog III Digiprog 3 Odometer Programmer with OBD2 Cable

So finally i’ve opened the ECU (sick job hahah) and desoldered the S95320 eeprom for reading with digiprog clone. It’s seems to read it fine.

I think ill make another post from opening the ECU to guide the people that have to do that.

http://www.mileageprogrammer.com/change-mileage-in-edc16-ecu-in-2005-audi-a4-b7/

How to use vag km immo tool program vag car key and odometer vehicle list

 

Here we will introduce VAG KM+IMMO Tool in two parts：

part 1. How to program VAG group VW Audi Skoda Seat keys using Xhorse VAG KM+IMMO Tool OBD2 cable when all keys are lost.

part 2.VAG KM+IMMO Tool VAG key programmer & mileage programmer car list:

part 1:

Here is the procedure of new keys programming by VAG KM+IMMO OBDII Tool:

1) Connect “VAG KM+IMMO Tool” to both pc and car.

2) Click “Service Mode” button to open “Service Mode” dialog.

3) Remove the 24C32 chip from instrument, read 24C32 EEPROM data with programmer, and save EEPROM.

4) Switch to “Service Mode” dialog, load EEPROM.

5) Save special EEPROM, write data to 24C32 EEPROM back to the chip,

and install chip back in instrument.

6) Save KEY file.

7) Login with the key file.

8) Click “Write” button to write back the original EEPROM (via OBDII).

9) Close “Service Mode” dialog, start adding dealer key (Click “Dealer Key” button, open “Dealer key” dialog.)

Note: Before the process is complete, keep the PC and device connected with vehicle, do NOT disconnect. If you interrupt, you

need to re-start from the first step.

part 2 :

VAG KM+IMMO Tool VAG key programmer & mileage programmer car list:

CDC32xx Module Options:

Golf, Golf+ from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):

odometer correction, PIN code read, EEPROM read/write;

Passat B6 from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):

EEPROM read/write;

Bora, Jetta from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):

odometer correction, PIN code read, EEPROM read/write;

Touran from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):

odometer correction, PIN code read, EEPROM read/write;

Caddy from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):

odometer correction, PIN code read, EEPROM read/write;

Tiguan, Eos from year 2008+: odometer correction, PIN code read, EEPROM read/write;

Octavia (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):

odometer correction, PIN code read, EEPROM read/write

NEC 24C32 Module Options:

VW Golf 6 – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

VW Passat , Passat CC – 2009+ with NEC and 24C32 EEPROM – odometer programming by OBDII;

VW Tiguan – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

VW T5 – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

VW Polo – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

Skoda Octavia 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

Skoda SuperB – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

Skoda Roomster, Yeti – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

Seat Ibiza – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

VW Multivan – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

VW EOS – 2009+ with NEC and 24C32 EEPROM – odometer programming by OBDII;

VW Caddy – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

VW Scirocco – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

VW Bora – 2010+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

VW Jetta – 2010+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

Skoda Fabia 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

Skoda Altea – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

Skoda Yeti – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

Skoda Altea – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

Skoda Exeo – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

GOLF6 MM7 Module Options:

VW Golf 6 – 2010 with MM7 (9S12) EEPROM – odometer programming and immobiliser data read by OBDII;

VW Tiguan – 2010+ with MM7 (9S12) EEPROM – odometer programming and immobiliser data read by OBDII;

Enjoy!!!

 

This article is from:http://www.mileageprogrammer.com/vag-km-immo-tool/