Yanhua Mini ACDP 2009 -2018 Volvo Key Programming: Tested Working

Yanhua Mini ACDP developed Module 12 to program key for Volvo Semi-smart (5-button key) . And Volvo fully-smart (6-button key) key programming is developing. Yanhua Mini ACDP program Volvo key without desoldering. It covers Volvo from 2009 year to 2018 year.

ACDP can program the following Volvo semi-smart (5-button key):

S60 (2010 -2018)

S80 (2009 -2016)

XC60 (2009 – 2018)

V60 (2011- 2017)

V70 (2009 -2016 )

XC70 (2010 -2016)

ACDP has the following Volvo IMMO functions:  

Read password

Add key

All key lost

Unlock key

Yanhua Mini ACDP can program Volvo keys without lifting and desoldering:

1. Prepare ACDP, OBP+ICP adapter, CEM interface board and CEM module.

2. Clamp two PCB locks.

3. Link ACDP and CEM module.

CEM position in the Volvo car.

This is the ECM module removed from Volvo car.

Unlock key Help:

Please put the Volvo key into the BAV adapter and unlock it with the CEM password file loaded when the key is matched.

Youtube video:

Comming soon….

Yanhua Mini ACDP Key Programming Volvo Module for  sale：

http://www.obdexpress.co.uk/wholesale/yanhua-mini-acdp-key-module-volvo.html

Please enjoy.

www.obdexpress.co.uk

Source:

http://blog.obdexpress.co.uk/2019/06/26/yanhua-mini-acdp-2009-2018-volvo-key-programming/

Free download Mercedes-Benz Xentry.OpenShell.XDOS 2019.07

There are a lot of changes in the interface, everything other is mostly the same.
—
DAS 7.7.2.1 version like in 2016.07.
—
Limitations for Old keys:
StartKeyCenter limitation for DAS.
DAS License.0 limitation.
2221-XX limitation.
3.91 limitation.
—
System in total:
License control for ANY keys (To block SCN accounts, possible for something else, different for each version).
XENTRY spyware (Mostly all of your manipulations with vehicles including VINs, system information and etc. are being sent to Daimler`s servers, different for each version).
2 old bombs in code are still not activated.
Some preparations in code for “global” changes.
Lifetime limitation depends on AddOns` support ending.
—
MUX FW update is not needed from the version 2015.09 to 2019.07

2019. Everything is on your own risk with 2019.07 version and ANY keys, especially online accounts. AS minimum your online account will be BANNED.
      Don`t connect the system to the Internet with Old or New keys without special protection (it`s not idiotic “tics” or the same bullshit), nobody knows what they will make with that information.
      Not all vehicles is possible to diagnose normally, problems with SCN with FREE solutions.

ISO with x86 systems unlock integrated.

MEGA links:

Xentry.OpenShell.XDOS.v19.7.4.2019.07

https://www.upload.ee/files/10082127/Xentry.OpenShell.XDOS.v19.7.4.2019.07.rar.html

(need password)

Source: mhhauto.com @ DieTRih

Option 2: tested Mercedes-Benz Xentry.OpenShell.XDOS 2019.07

HDD version (SS210-D7)

SSD version (SS210-AD7)

Works with

MB sd connect c4

Software includes:

Xentry 07.2019

DAS 07.2019

EPC 11.2018

WIS 11.2018

SDmedia

Vediamo

Vediamo Database

Star Finder 2008$2016

PL73

DTS

Support Mer-cedes Benz Cars After Year 1989

Passenger Car Support List:

A(176),  A(169),  A(168),  B(246),  B(245),  CLC(117),  C(204)  C(203),  C(202),  190(201),  E(212),  E(211),  E(210),  124(124),  S(222),  S(221),  S(220),  S(140),  S(126),

E(207),  CLK(209),  CLK(208),  CLS(218),  CLS(219),  CL(216),  CL(215),  CL(140)  SLK(172),  SLK(171),  SLK(170),  SL(231),  SL(230),  SL(129),  SL(107),  SLS(197),

M(166),  M(164),  M(163),  G(463),  G(461),  E(212),  E(211),  E(210),  124(124),  S(222),  S(221),S(220),  S(140),  CLK(209),  CLK(208),  CLS(218),  CLS(219),  CL(216),

CL(215),  CL(140),  SLK(172),  SL(231),  SL(230),  SL(129),  SL(107),SLS(197),  M(166),  M(164),  M(163),  G(460),  GL(164),  GLK(204),  R(251)

Van Support List:

MB 100(631),  T1,  SprinterIII,  SprinterII,  SprinterI,  Sprinter900,  Citan,  Vito(639),  Vito(638), V(638),   Viano(639),  T2,  Vario,  Vaneo(414)

Truck Support List:

Actros963/4,  Actros2,3,  AtegoIII,  AtegoII,  AxorII,  Eonic,  Zetros,  Actros,  Atego Light,  Atego Heavey,  HPN M96,  Atron,  HPN M2000,  SKL,  FSK,  Further model series

Unimog Support List:

U20,  UGN,  UHN

Bus Support List:

TRAVEGO,  INTOURO,  INTEGRO,  CITARO,  CAPACITY,  CITO,  TOURISMO,  O350/O403, CONECTO,  O404,  O405-O408,

Minibus,  OC500,  TOURO,  TOURINO,  MBC,  MULITEGO,  O500,  O500/OH,  OH,  OH368,  OF,  OF384,  LO,  O400,

FURTHER MODEL SERIES

Super Sports Car Support List:

SLR(199)

“Introduction to DTS-monaco”

1.DTS-monaco is the official software used in Daimler-Benz development engineers.

2.DTS Monaco is a controller for vehicle diagnosis and general engineering test terminals of the controller functions. The Monaco is derived from the name used for modular Analyzer traffic.

3.DTS Monaco covers all areas of engineering, testing, and production test preparation for all tasks

4. in the Mercedes-Benz maintenance tests it is the ultimate authority, perfect support for C4 (SDconnect) and (Ecom) hardware (currently Das-xentry. Vediamo lower privileges)

“Features”

Quick Test; the vehicle ECU for rapid testing, test at the same time, you can choose to edit more functionality.

Variant Coding; add VO-delete VO variation functional.

ID identification; one-click to read the whole car and saved, all module programming.

Complete Variant Coding; read all ECUcoding vehicle data in one pass, write again to the vehicle, completely offline.

Diagnostic Services and advanced features can see internal and external data you choose modules, open computer authorization (not authorized), activate the ECU reset ECU, modifying the original chassis number.

Flash programming; completely off-line programming,

Diagnostic Trouble Code diagnosis module DTC trouble code.

ECU Exchange; two of the same ECU, are exchanged by reading the data to import the data.

Symbolic trace: recording a trace file%

Basic programming set code function:

1 unit for off-line programming

2, a key to off-set code

3, W166, cancel the programmed number of calculation method of urea, one perfect canceled all 166 urea system.

The new c s-series to the factory installed conversion:

4, 222, 205 installing fragrance systems

5, 2015, paragraph 212, changing traffic light permanently lit

6, 212, 204, adding electric ear

7, 222 205 HU5 traffic solution for DVD video

8, W164 closed recycling system

9, W205, retro atmosphere lamp

10, 205, 222 adding electric ear electric trunk, the trunk kicking function

11, 166, how to modify the gateway set up codes

12, 166 meters finished degrees Fahrenheit to degrees Celsius

13, US standard maintenance mileage be set to the number of miles

14, 164 disabled diesel particle filter regeneration system

15, 166 canceled urea

16, 205 added electric rear vision mirror

17, HU45 regional Chinese resolve lock

18, W204 W166 foldable rear-view mirror

19, change the 166 on board, display in Celsius

20, W212 disable ECO configurations

21, activate the HOLD function ABR2XT

22, open W22 looked up appears

23, the AMG sports package enabled W212

24, the air bag computer reset factory State W166

25, to increase the brightness of the color instrument cluster s W222

26, 722.97g to install the steering wheel shift paddles

27, W221 AMG W216 dashboard style

28, airbag ECU unlock W204 212

29, disabled child seat recognition sensors W221

30, opening rear fog lamps as spare brake lights with W222

31, increasing engine power MED177

Enjoy.

For sale:

V2019.07 MB Star Diagnostic SD Connect Compact C4/C5 Xentry OpenShell Software HDD Version:

http://www.obdexpress.co.uk/wholesale/2019-7-mb-star-sd-connect-software.html

 V2019.07 MB Star SD Connect C4 256Gwith Vediamo and DTS Monaco Software SSD Version:

http://www.obdexpress.co.uk/wholesale/2019-7-mb-star-software-ssd.html

Source：

http://blog.obdexpress.co.uk/2019/06/24/free-download-xentry-openshell-xdos-2019-07/

How to install V2018.3 (43.06) Actia Multi-Diag Office on win7?

How to install V2018.3 (43.06) Actia Multi-Diag Office on Win7 sp1 x32 (without activation). It is running well with J2534 PassThru device to diagnose all cars up to 2018 such as VW Passat VIII (2015-2018).

V2018.3 (43.06) Actia Multi-Diag Office will run based on this Virtual drive device, please download first.

https://mega.nz/#!lAgnzYhC!ZhWYbMCcT_sPkEVCAPf8jtG-65rut6zVxkFKFMP9zOE

(DTLite4454-0314.exe)

Device: J2534 PassThru OBD device (VCI 033918)

Software: V2018.3 (43.06) Actia Multi-Diag Office

Computer operation system: Win7 sp1 x32

Car model and year for test: VW Passat VIII (2015-2018)

V2018.3 (43.06) Actia Multi-Diag Office install on win7 and diagnose VW Passat VIII (2015-2018):

Video first:

Then Images and words’ explanation:

1. Open “Daemon Tools Lite” as administrator.

Select language, then Next ->I agree -> Next.

Free license.

Next

Not install Google Chrome.

Next

Install.

Get a windows message “Device driver software installed successfully”.

Install Desktop Gadgets.

Finish The Daemon Tools Lite setup wizard.

2. V2018.3 Actia Multidiag Crack (No need registration):

1) Open DVD multidiag 2018, copy “Crack” on the desktop.

2) run ACTIA_NET_BLOCK.bat (Run as administrator if possible)

3) run Activation MAJ MD 033918/keyUpdate (Run as administrator if possible).

3. Install Actia Multidiag Standard Profil (if the case, use S/N: 033918 instead of xxxxxxx)

RESTART COMPUTER after installation finished.

4. Go to C:\ACTIA\Portal, Remove Wget.exe

5. Go to control panel -> uninstall or change a program -> there are 3 drivers made by ACTIA. Remove all 3 drivers.

6. Then: (supplier told me it is optional, I have done it anyway)
7. Go to C:\ACTIA\Portal\chrome\multidiag\content\scripts
8. Open in a text editor file multidiag.js
9. Go to line “var showWarningPT1Window=true” and make this line like
10. “var showWarningPT1Window=false”

Save ” multidiag.txt”

Rename ” multidiag.txt” as ” multidiag. js “

7. Install I+ME-Actia-PassThru-XS2G-Driverpack-2.8.1.14.exe

Select language

Next

I accept the agreement.

Next

Next

Install

Finish the I+ME-Actia-PassThru-XS2G setuo wizard.

8. Plug Actia PassThru OBD device to the computer.

9. Computer -Manage -Device Manager – PassThru+ XS USB Driver

10. Use Multi-diag to diagnose VW Passat VIII (2015-2018)

The vehicle communication card cannot be reached…

Just go to update Driver software

Continue diagnosing.

Job is done.

Good day.

www.obdexpress.co.uk

http://blog.obdexpress.co.uk/2019/06/25/how-to-install-v2018-3-43-06-actia-multi-diag-office-on-win7/

Which tool can do Toyota prius 2005 dash odomter correction?

 Car model and year: Toyota prius 2005y dash

Purpose: Read and write KM

Toyota Prius 2005 KM reading & writing, digiprog has problem, orange 5 ,Carprog, digimaster 3 are all ok, go on reading for instruction.

Tool to test:

1. digiprog 3: Failed

Using soldering points as it is showing in manual. After reading I got wrong mileage 1114095km…original mileage is 275 000km. but after writing that km which you need, dash shows everything ok in car.

orange 5 programmer + nyo : success

I read it with orange 5 programmer without any problems. Calculated with nyo, as landruiser 93c66. Attached 100% working pinout reading in circuit, maybe someone would be useful this post in the future

3. Carprog full firmware V8.21 : success

Carprog is ok for tis dash–prius 93c66

Change KM Toyota Prius 2006 93C66 for example:

Remove unit from car. Open it and find internal 93C66 EEPROM memory inside.

Use the Carprog A4, A5 or A6(due to situation) EEPROM adapter and change mileage.

In most cases need to remove EEPROM from the board.

Open carprog full software

Select Dashboard->Toyota->Prius->Prius Yazakj 93C66 v0.4

   

Manually enter mileage you desired

Press Write KM

 

Write KM success.

4. Yanhua digimaster 3 : success

I recommend Yanhua digimaster 3, it works for Prius 93c66.

Method: it needs to dismantle the dashboard and read the data.

Look at this image: digimaster 3 for prius

Source:http://www.obdexpress.co.uk/upload/pro/digimaster-3-supported-mileage-correction-list.pdf

Edit by Laurance

http://www.mileageprogrammer.com/toyota-prius-2005-km-adjustment-digiprog3/

How to downgrade Micropod ii Witech?

The answer is it’s not possible to downgrade if using micropod ii  clone .

downgrade is not a simple process and sometimes bad quality clone may be lost.

downgrade is needed in next situations:

return from witech 2 to witech 1.

make vci pod/micropod compatible with cda.

if micropod setup utility failed during update.

Supposing your got Witech 2.0 warning:

“This vehicle is supported by wiTECH 2.o software. This vehicle is no longer supported by wiTECH 1.0. Please use wiTech 2.0 to service this vehicle. You will return to discovery. ”

Wrong solution:

To update to wiTECH 2.o software from wiTECH 1.o

You may think you have online account and tried to update, actually it will have risk of being locked by Chrysler server or you can’t downgrade anymore.

Correct solution offered by obdexpress.co.uk engineer:

Option 1:

Remove new version V17.04.27, download and install lower version witech 17.03.10.

Free download witech 17.03.10

https://mega.nz/#!BNAjnAQB!AWiM7QTImGt5n0XvgqNLF6rZ87gFQ4GqC9rl4dOtYcY

Option 2:

Reinstall the computer operating system, and install wiTech V17.04.27 software again.

Free download wiTech V17.04.27 software.

https://mega.nz/#!Nm5QRQYR!fVPAE7SNtYa2iE5eqQaZ1zyW7A1nh94-vPGpK1Iu3lg

Good luck!

http://blog.obdexpress.co.uk/2019/06/21/how-to-downgrade-micropod-ii-witech/

2012 Discovery 4 OBD km change with OBDSTAR X300M

Topic: 2012 Discovery 4 OBD km change

The car: 2012 Land Rover Discovery 4

The original km: 153503

The final km: 149999

The odometer correction tool:

OBDSTAR X300M

The odometer correction process:

select the function in X300M:

vehicles – cluster calibrate

 

select the sw and vehicle:

sw: land rover 30.73

  

vehicle: discovery 4

Obdstar starts to do change mileages

Tips:

km range: 0-700000

generally maximum error does not exceed 206km

Pls input the mileage for adjustment

  

km will be changed to 150000

 

The result: odometer correction success!

The new km is displayed on the dashboard

http://www.mileageprogrammer.com/2012-land-rover-discovery-4-odometer-correction-with-obdstar-x300m/

Tips of how to choose Car diagnostic tools and software

After years of research and money invested, I would like to share and describe my collection of hardware and software.

1. Genuine licensed Delphi DS150e Cars and Trucks: pretty much the main tester I use because of simplicity and fast response. Only tool suited for Iveco Daily.2. KTS540 licensed with ESI2.0 (One-time-purchase licence): I use it only on cars Delphi can’t diagnose properly. Good on Euro5 onward cars, BMWs.3. Launch easydiag 2.0 activated PRO online: Always in my pocket for fast diagnosis, key programming on Ford, module configuration on Mercedes, diagnostic on latest Ford Mustang 5.0 and USA imports, suspension adaption on Range Rovers, Mercedes Sprinter. Not good for module reflash.

   4. Actia Multidiag XS 2G (2nd generation), currently with its base program (latest version v2018 43.51), it is a bit slower and the interface not that friendly like Delphi, but it is special because its passthru compatibility. I also use it via Passthru with:

• Mercedes-Benz Xentry Passthru 2018.12 (tested and sees all modules on X-klass 2018, works with DAS as well on older cars. The only way to diagnose this car among all my testers)
• Forscan
• SDD JLR (v156 current version)
• Toyota Techstream

5. OPCOM 2018 (Revision D+): powerful and cheap tool, covers cars until 2018.6. VCDS 18.2: for all VAG cars: encountered a UDS communication problem on a Passat B8 2.0 Bi-TDI7. Multiecuscan 3.9R1 with ELM327, mostly for Ducato euro5, but it works flawless on any Fiat, Alfa, even Suzuki SX4 1.9JTD etc. It covers dealer functions.

   8. VAS5054a and VAG CAN PRO: reflashed modules on VAG. VAS5054a can be used with Xentry Passthru.

   Every tool has its capability. For example, I can do full coding on PSA with Launch, I can do coding on Renault/Dacia with Actia, on Passat B8 Bi-TDI i could do function tests on AdBlue only with KTS. Delphi covers pretty much everything.

 

9. BMW INPA

I would suggest to purchase cheap leads from obdexpress.co.uk instead of trying to use pass through. That way you can use any of the many guides available on the internet. Also I believe the seller is selling the leads with software slightly modified to allow very easy installation.

The thing to note – for E series, earlier cars need pins 7+8 joined, while late E series need pins 7+8 separated. I bought my leads long time ago so I have 2 separate leads, however now you can purchase lead with switch to change this. Also you can use INPA with some F series models, but for that need ENET lead and need to modify a setting in a file. Both leads are available very cheap.

 

10. Nothing beat the factory equipment. All you ever need is: 
    1). Launch scanner for quick functions
    2). Alldata/prodemand
    3). Factory software! Xentry, Ista, Odis, etc.

To be continued…

 

Enjoy.

Credit to @AfXv237 (a member of mhhauto.com) for his sharing. 

http://blog.obdexpress.co.uk/2019/06/18/car-diagnostic-tools-and-software-advice-and-tips/

[Download Crack+ Install] V2018 Actia Multi Diag 43.06 On Windows7

V2018  Actia Multi Diag arrived at obdexpress.co.uk, here we’d like to share the free download links and installation method:

Actia 3.2018 43.06: https://mega.nz/#!QNskhKqY!q93QYap0xNayDMhO1Y0DRpf_OkpkYJQEgC0vnrPzfOM

CRACK FIX: https://mega.nz/#!YYhwGSKb!hAQaG7RunQLdoG7njQ1-FLp7HiYLX0CYqe53kEOrEXY

older version Actia 1.2018 42.09: https://mega.nz/#!croCEKIQ!7PHYKUAWkVqKBfc1DTzmQtJUEcYx9iQ0KsNLXrYi2ew

VCI 033918

Security: unknown, not tested by professionals yet

Good to know: you need luck with actia multi diag interface china clone

For sake of security and convenience, you’d better to have actia reliable

here are all tested versions, confirmed to work perfectly

actia multi diag 2018:

http://www.obdexpress.co.uk/wholesale/multi-dig-access-j2534-pass-obd2-diagnostic.html

actia multi diag 2016:

http://www.obdexpress.co.uk/wholesale/multi-diag-access-j2534-pass-thru.html

actia multi diag 2015:

http://www.obdexpress.co.uk/wholesale/i-2015-multi-diag-access-j2534-pass-thru-obd2-device.html

actia multi diag 2014:

http://www.obdexpress.co.uk/wholesale/multi-diag-access-j2534-pass-thru-obd2-device-obd2express.html

actia multi diag 2013:

http://www.obdexpress.co.uk/wholesale/2013-ii-multi-dig-access-j2534-pass-thru-obd2-device.html

actia multi diag 2011:

http://www.obdexpress.co.uk/wholesale/multi-dig-access-j2534-pass-thru-obd2-device-2032.html

FACT:

It works with any Actia interface either genuine or clone as long as the PIC chip is flashed properly. For 1st generation yellow you need to reflash PIC12F629 (link for guide bellow), as for 2nd generation XS 2G (silver/black) you need to reflash 16F630 (I will look for a guide for this one). They all use the same software and drivers from this INFO file. I went from a clone 1st gen to a genuine 2nd gen on the same laptop, same software without changing anything. I strongly advise people to buy a genuine 2nd gen since it’s got a powerful program behind with all functions and furthermore you can use it as a Passthru device (it has J2534-1 and J2534-2) with various dealer software. You hit 2 birds!

First of all, you must modify or buy a modified clone. The procedure is the same on all Actia devices, either clone or genuine or 1st or 2nd generation.

1st generation yellow VCI: Link for guide if your chip PIC12F629 is not modified : https://mhhauto.com/Thread-Multidiag-2017-III-SP4-Hex-for-Pic

2nd generation silver XS 2G: I did not find a proper guide now, all I know is that you have to reflash PIC16F630.

Installation instructions:

– WORKS ONLY ON 32BIT (TESTED ON WINDOWS 7 SP1 X32)

@@@@@@@@@@INTERNET MUST BE OFF@@@@@@@@@@@

1. run ACTIA_NET_BLOCK.bat (Run as administrator if possible)
2. run Activation MAJ MD 033918/keyUpdate (Run as administrator if possible)
3. Install Actia Multidiag Standard Profil (if the case, use S/N: 033918 instead of xxxxxxx) (I selected country: France and simply changed language after installation)

RESTART COMPUTER after installation finished

3. Go to C:\ACTIA\Portal
4. Remove Wget.exe
5. Go to control panel -> uninstall or change a program -> there are 3 drivers made by ACTIA. Remove all 3 drivers.
6. Install I+ME-Actia-PassThru-XS2G-Driverpack-2.8.1.14.exe

Then: (supplier told me it is optional, I have done it anyway)

1. Go to C:\ACTIA\Portal\chrome\multidiag\content\scripts
2. Open in a text editor file multidiag.js
3. Go to line “var showWarningPT1Window=true” and make this line like
4. “var showWarningPT1Window=false”

Then: Run the application, connect VCI to car and to laptop’s USB, try to make a diagnostic on a car and it should detect a new hardware. If it does not recognizes it, then you have to update it manually via Start menu->right click on computer->Manage->Device Manager->Other devices->Right click on Unknown device->Update driver software->Browse my computer for driver->”C:\Actia\Drivers VCI\PT1G”

If you want to update from older version, simply uninstall old version and make sure you follow the steps again completely (including removing the 3drivers)

Note: it should appear each time when you diagnose that your VCI is old and blablabla, just click continue and it connects to the car

Note2: My supplier told me that it might not be 100% compatible with all cars as it is the old interface and does not do the multiplexing like the newer one. I tested on a few cars from 2000 to 2015 and for 300euro it is worth adding to collection!

Note3: On 2nd gen XS 2G it should be recognized it automatically, it will not display any messages and will work much faster and stable.

FOR FURTHER COMPATIBILITY WITH HONDA HDS, JLR SSD, NISSAN CONSULT, TOYOTA TECHSTREAM ETC.                    Visit fantomel’s collection:

ACTIA-MULTIDIAG PART1:

https://mega.co.nz/#F!XYQ0FBBI!eW_ZAaLsrK1VHfHPdQAwGA

1. Actia Multi-Diag I 2009 v.16.21
2. Actia Multi-Diag I 2010 v.19.10
3. Actia Multi-Diag III 2010 v.21
4. Actia Multi-Diag II 2011 v.23.07 + Vivid WorkShop
5. Actia Multi-Diag III 2011 v.24.01 + Service Pack 3 v.24.31
6. Actia Multi-Diag I 2012 v.25.13
7. Actia Multi-Diag II 2012 v.26.08.1 + Service Pack 2 v.26.25 + Vivid WorkShop
8. Actia Multi-Diag III 2012 v.27.06 + Service Pack 2 v.27.21 + Vivid WorkShop
9. Actia Multi-Diag I 2013 v.27.31 + Vivid WorkShop
10. Actia Multi-Diag II 2013 v.28.08 + Service Pack 1 v.28.11
11. Actia Multi-Diag III 2013 v.29.04+Service Pack 1 v.29.11+Service Pack 2 v.29.21
12. Actia Multi-Diag IV 2013 v.30.06+Service Pack 1 v.30.11+Service Pack 2 v.30.21
13. Actia Multi-Diag I 2014 v.31.09+Service Pack 1 v.31.11+Service Pack 2 v.31.21 + Vivid WorkShop
14. Actia Multi-Diag II 2014 v.32.05+Service Pack 1 v.32.11
15. Actia Multi-Diag I 2015 v33+Service Pack 1 v.33.11+Service Pack 2 v33.21+Vivid WorkShop
16. ALL KEYGENS FROM v.19 TO v.32

ACTIA-MULTIDIAG PART2:

https://mega.co.nz/#F!WUEnXK7I!M8Wg4MHBX0jLFTeRBoXz1w

17. Actia Multi-Diag CD versions 6.1,6.3&7.3
18. Actia Multi-Diag Trucks 2011
19. Actia Multi-Diag I 2015 v.33.06+Service Pack 1 v.33.11+Service Pack 2 v33.21+Vivid WorkShop + KG
20. Actia Multi-Diag II 2015 v.34.07+Service Pack 1 v.34.11+Service Pack 2 v.34.21
21. PassThru programs,drivers and instructions on how to install them.
22. Added Original MDO adapters pinouts

[Image: 105zjlt.png]

23. Actia Multi-Diag III 2015 v.35.09+Service Pack 1 v.35.11+Service Pack 2 v.35.21
24. Actia Multi-Diag I 2016 v.36.05+Service Pack 1 v.36.11+Service Pack 2 v.36.21+Service Pack 3 v36.31+Service Pack 4 v36.41
25. Jaltest Trucks that has same interface as Actia Trucks versions 2013.3.1.1 and 2014.1.1.1

note: read the pdf files to know your tool better and to make proper choices, specialy for passthru programs.

password if needed: fantomelthanks to fantomel, bouizanne, zdsSF, Twist

source: https://mhhauto.com/Thread-ACTIA-MULTI-DIAG-COLLECTION-2009-2010-2011-2012-2013-2014-2015-2016

Just in case, be sure you have these programs as well.

https://support.microsoft.com/en-gb/help/2977003/the-latest-supported-visual-c-downloads

https://download.microsoft.com/download/6/E/4/6E48E8AB-DC00-419E-9704-06DD46E5F81D/NDP472-KB4054530-x86-x64-AllOS-ENU.exe

https://java.com/en/download/manual.jsp

Final note:

As a personal experience, the 1st generation Actia is quite limited on newer Euro5+ cars, used on a variety of cars.  But for example it was the only one that could adapt pilot injection on a peuget boxer 2.2hdi among genuine delphi,kts,launch; on a BMW F30 328i it had all the functions and parameters as other testers I own. The second generation though it is something else. It connects much faster and you feel safe working with it.

http://blog.obdexpress.co.uk/2019/06/17/download-installv2018-actia-multi-diag/

Ktag clone is the cheapest solution for EDC17C60 modification

Car ECU model:

Peugeot Partner 1.6 BlueHDI 2015 with EDC17C60

Purpose:

For modification, If possible I prefer via ODB updates and necessary is functionality of remove SCR (Urea) alerts.

Cheapest Solution:

Buy yourself a Ktag clone from China and solve your problem !!

Ktag clone is fine, I did Read and write a edc17c60, 308 2015.

Using ktag, clone.

It works fine, it whas listed under citr cactus.

Which version of ktag clone to use ?

KTAG V7.020 Firmware V2.25 red pcb.

Obdexpress.co.uk , always good service

Source:http://blog.obdexpress.co.uk/2019/06/15/ktag-clone-for-edc17c60/

Renault Can Clip V188 V187 Download Free

In this post, you can free download Renault Can Clip 188 187 185 184 183 182 181, which are tested working fine with RLT2002 clone or genuine, Renault/Nissan Alliance VI probe, Renault Can Clip etc.

Free download Renault Can Clip 188

https://mega.nz/#!bY0TSQYJ!I4OjHdEqbdpPQMDyYMRrW0ez3JA1oC4VSHO-s2zb5sE

No password

Security: unknown (shared in forum)

Notes:

For RLT2002 clone or genuine you have to replace that two files as in v185, v186 or v187

For Renault/Nissan Alliance VI probe you don’t need to do anything.

Good luck

Free download Renault Can Clip 187 – Torrent on mega

https://mega.nz/#!cVRhjaCA!pg5jLiq3l0Ia12McXQmGGi5Ql-E7mSzNzjY-V5TiOOg

No password

Security: unknown (shared in forum)

Year / Release Date: 2019

Version: Renault CAN Clip 187

OS: Windows 7, 10 x32

Language: Multilingual (English, French, German, Italian, Russian and other)

Medicine: inside

Description: The program for the diagnosis of electronic systems of cars Renault, Dacia and Samsung. Working with scanner Renault CAN Clip only.

How to activate Renault Can Clip 187:

Look on ReadMe!.txt (Inside the folder “Activation (Patch V3)”)

If you want – there are older & stable versions [all can work with Renault Can clip Clone (China RLT2002 probe)]

Renault CAN Clip V185 torrent:

https://mega.nz/#!dRhhgSIK!AznL5QDKgOd0qpqEGxGqPjsrmWA304DtEf0wEC0Ejww

Renault CAN Clip V184:

For those who have a connection problem with interface RLT2002 (ori or clone):

You must modify 2 files in version 185 (Computer >>> Disk C >>> Clip >>> Config):

I leave here the download of the file :

https://mega.nz/#F!dEpkTQKZ!LLcV-JFbZZnmNPYOyDddww

or https://mega.nz/#!VQojQQDZ!tASqH9niHDj3wQlAU0ex5IzqBOB0hXyjHJKNnLyHVXc

Renault CAN Clip V183 torrent:

https://mega.nz/#!9c5jhAqT!3d0loW6W9LVV2YjoVSPF6WHgty_kY-DSEorVAsUlGrE

Renault CAN Clip V182 torrent:

https://mega.nz/#!FN5FFAQC!Mc_YqdVmeHu7i-5fK_IIGyxKW6jFg-OCep2zDt8pYRc

Renault CAN Clip V181 torrent:

https://mega.nz/#!BVwjRKhR!smlYv9N8o89z3iCvI_KkeswBTMJN671EiiXH_opFJkM

Importance!!!

1. For the China RLT2002 probe, change the file, “AA_VIMSelection.dll”.

I leave here the download of the file :

2. For those who have a connection problem with interface RLT2002 (ori or clone):

You must modify 2 files in version 185 (Computer >>> Disk C >>> Clip >>> Config):

– probesConfiguration

and – probesConfiguration_logs (normally both at the bottom)

If you are in V184, recover these 2 files, install the V185 and modify the files

DO NOT REPLACE THE “VIMI” FILE …….

Small Reminder: If a Clip Version is already installed on your PC DO NOT REPEAT activation procedure

Files in pj (no pass)

https://mega.nz/#F!dEpkTQKZ!LLcV-JFbZZnmNPYOyDddww

Enjoy.

Thanks.

www.obdexpress.co.uk

http://blog.obdexpress.co.uk/2019/06/15/free-download-renault-can-clip-188-187/